Language Setup - Phonocar VM015 Montageanleitung

LANGUAGE SET-UP
To enter the menu, press the SETUP-key. The monitor
will show the SET-UP-menu.
Move with the remote-control keys ( 34 ) and select
with ENTER-key the function required (Language, Audio,
Subtitle, Menù).
Within the LANGUAGE-section, it is possible to change
the language, audio and subtitles of the DVD-player.
The set-up of the film-language depends from the DVD
and can therefore vary from the selected set-up.
Normally, the DVDs ask for the language-set before
showing the title-menu.
LANGUAGE OF MENU-FUNCTIONS
With cursors, move to bottom and go to the line OSD
menu.
Press ENTER and select the required language.
Press SETUP to leave the menu.
LANGUAGE FOR AUDIO
Use cursors to move to the bottom and go to the line
Audio.
Press ENTER and select the required language.
Press SETUP to leave the menu.
LANGUAGE OF SUB-TITLES
Use cursors to move to the bottom and go to the line Sub-
title Lang.
Press ENTER and select the required language.
It is possible to de-activate the sub-titles by selecting OFF,
instead of choosing one of the given languages.
Press SETUP to leave the menu.
LANGUAGE OF DISC MENU
Use cursors to move to the bottom and go to the line disc
Menu.
Press ENTER and select the required language.
Press SETUP to leave the menu.
24