Subsequent Installation Of Software Components - Siemens SISTORE MX Installationshandbuch

Software (SISTORE unit)
9.3

Subsequent installation of software components

54
Siemens Building Technologies
Fire Safety & Security Products
3. Select the option Update.
All the components that were installed during the previous setup will be
reinstalled.
Please note that existing files may be overwritten!
The following files will not be overwritten:
files containing the configuration settings,
files containing the user management data, and
files containing the recorded sequences.
Malfunctioning caused by unauthorized software on the SISTORE unit
IMPORTANT
Install only software products on the SISTORE that have been approved by
the manufacturer.
Software components of the SISTORE MX application software can be
subsequently installed on the SISTORE unit.
1. Place the installation CD in the CD drive.
2. Launch SISTORE_MX_280.exe.
The following dialog box opens.
3. Select the option Modify.
4. Click Next.
02.2009