Sistore Unit - Cka4820 - Sistore Remoteview - Lan Cameras - Siemens SISTORE MX Installationshandbuch

Installation
8.4.14 SISTORE unit – CKA4820 – SISTORE RemoteView – LAN cameras
50
Siemens Building Technologies
Fire Safety & Security Products
Fig. 31 SISTORE MX – CKA4820 – SISTORE RemoteView – LAN cameras
system overview
1 CKA4820
2 SISTORE unit
3 Client PC with RemoteView
4 SISTORE MX: max. 64 LAN cameras
SISTORE MX 3G: max. 16 LAN cameras
For a more detailed description of the connections please refer to Section
MX / MX DVD or Section 7 D escription of SISTORE MX 3G / MX 3G DVD.
1 8 5 H 1 8 6 H
Prerequisite:
The CKA driver is installed and the icon
Section 9 .3 S ubsequent installation of software components.
1 8 7 H 1 8 8 H
1. Connect the CKA4820 control panel to the SISTORE (see
2. Configure COM1B on the control panel as an RS485 interface.
Further information on this can be found in the instruction manual for the
control panel.
3. Start the SISTORE MX application software.
4. Switch to configuration mode.
5. Select the System tab.
6. Mark the checkbox CCTV keyboard. Further information on this can be found
in the SISTORE MX Configuration Manual.
The interface for the control panel is enabled.
Connections
Signal
A (Rx/Tx +)
B (Rx/Tx -)
GND
optional
various manufacturers
is displayed in the task bar. See
SISTORE unit
9-pin Sub-D socket
2
3
5
6 D escription of SISTORE
1 8 3 H 1 8 4 H
F ig. 31).
1 8 9 H
CKA4820
9-pin Sub-D plug
5
9
6
02.2009