Connecting The Ccda1435 Dome Camera - Siemens SISTORE MX Installationshandbuch

Installation
8.4.6

Connecting the CCDA1435 dome camera

42
Siemens Building Technologies
Fire Safety & Security Products
Fig. 22 Dome CCDA1435 – CKA4820 system overview
For a more detailed description of the connections please refer to Section
MX / MX DVD or Section 7 D escription of SISTORE MX 3G / MX 3G DVD.
1 3 6 H 1 3 7 H
Prerequisite:
The CKA driver is installed and the icon
Section 9 .3 S ubsequent installation of software components.
1 3 8 H 1 3 9 H
1. Connect the dome cameras and the control panel to the SISTORE (see
22). Further information on this can be found in the instruction manuals for the
dome camera and the control panel.
2. Start the SISTORE MX application software.
3. Switch to configuration mode.
4. Select the System tab.
5. Mark the checkbox CCTV keyboard. Further information on this can be found
in the SISTORE MX Configuration Manual.
The interface for the control panel is enabled.
6. Select the Cameras tab.
7. Mark the checkbox PTZ.
8. Choose the camera type from the first list box.
9. Choose the interface from the second list box.
10. Click Apply.
The interface for the dome camera is enabled.
Further information on this can be found in the SISTORE MX Configuration
Manual.
6 D escription of SISTORE
1 3 4 H 1 3 5 H
is displayed in the task bar. See
F ig.
1 4 0 H
02.2009