Connecting The Ccda1425 Dome Camera - Siemens SISTORE MX Installationshandbuch

8.4.5

Connecting the CCDA1425 dome camera

Siemens Building Technologies
Fire Safety & Security Products
Fig. 21 CCDA1425 dome camera – system overview
For a more detailed description of the connections please refer to Section
MX / MX DVD or Section 7 D escription of SISTORE MX 3G / MX 3G DVD.
1 3 1 H 1 3 2 H
1. Connect the dome cameras to the SISTORE (see
information on this can be found in the instruction manual for the dome
camera.
2. Start the SISTORE MX application software.
3. Switch to configuration mode.
4. Mark the checkbox PTZ in the Cameras tab
5. Choose the camera type from the first list box.
6. Choose the interface from the second list box.
7. Click Apply.
The interface for the dome camera is enabled.
Further information on this can be found in the SISTORE MX Configuration
Manual.
Connections
Signal SISTORE unit
9-pin Sub-D socket
A (Rx/Tx +) 2
B (Rx/Tx -) 3
CCDA1425 interface configuration
Baud rate: 9600
Parity: None
Dome CCDA1425
Installation
6 D escription of SISTORE
1 2 9 H 1 3 0 H
F ig. 21). Further
1 3 3 H
CCDA1425
Data +
Data -
41
02.2009