Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Contents
1. Function and features
The freely programmable controllers of the "ClassicController R 360" series are
rated for use under difficult conditions (e.g. extended temperature range, strong
vibration, intensive EMC interference).
They are thus suited for direct mounting into machines in mobile and rugged
applications. Due to their specification the inputs and outputs are especially rated
for this use. Integrated hardware and software functions (operating system) offer
high protection of the machine.
The controllers can be used as CANopen master.
The controllers "ClassicController R 360" are not approved for safety-rele-
vant tasks in the field of safety of persons.
2. Programming
The application software can be easily created by the user with the ifm program-
ming system CODESYS according to IEC 61131-3.
In addition to the programming system the complete system manual is required
to program the controller.
If this manual is not available, please contact one of the ifm branch offices over-
leaf for your free copy. The system manual (pdf format) can also be downloaded
from the web (www.ifm-electronic.com)..
➔ System manual R 360; English (order no. EC2041)
Request
➔ Data sheet direct ➔ CR0020 ➔ Additional data
Internet
The user is responsible for the safe functioning of the application programs
which he creates himself. If necessary, he must additionally obtain an
approval according to the corresponding national regulations by the correspond-
ing testing and supervisory organisations.
C
C
CR0020
LASSIC
ONTROLLER
page 13
page 13
page 14
page 14
page 15
page 15
page 16
page 17
page 17
page 19
page 20
PAGE
15
Werbung
Kapitel
Inhaltsverzeichnis
