Help In Case Of Problems; Care And Maintenance; Care; Maintenance And Repair - Rothenberger R 140 B Bedienungsanleitung

4.

Help in case of problems

Problem
Machine does not run
Spiral does not rotate when
the hand-lever has been
operated.
5.

Care and Maintenance

5.1

Care

The equipment should be handled with care and cleaned regularly.
After every use the screws and tools should be cleaned and treated. We recommend our special
cleaning agent „ROWONAL".
Care and maintenance of the gasoline motor must be according to the specifications of the
manufacturer. After five operating hours the first oil change is necessary. For other oil changes use
the same oil type. Changing of the air filter must be according to the specifications of the
manufacturer.
The machine has a lubricating point (S) at the drive shaft in the area of
the clamping jaws, which has to be lubricated using a universal grease
after ten hours operation in each case. In general, all mobile parts in the
area for stressing the clamping jaws are to be cleaned regularly.
5.2

Maintenance and Repair

Important! All maintenance and repair work should only be carried out by experienced
service personnel.
The ROTHENBERGER service agents or the manufacturer's own repair department are always
available to help you. We will also of course send you spare parts immediately. Contact your local
dealer or the manufacturer.
You can order accessories and spare parts at your local dealer or through our After Sales Hot-Line
Service.
Tel. +49 6195 800 8200
16
Possible cause
No benzine
fuel tap is closed
Motor faulty
Clamping jaws worn
Drive belt worn
Fax:
ENGLISH
Remedy
Re-filling benzin
Open fuel tap
Call Customer Service
Replace clamping jaws
Replace drive belt
+49 6195 800 7491