Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fitting your Pet Door in a wall
Before you begin
Please contact a qualified builder to discuss the best location to fit your Pet Door.
Remember some walls can be structural or there may be electrical wires, gas or
water pipes hidden within them which, if damaged, can cause serious problems.
We recommend that you do not attempt the work yourself unless you have
relevant experience. The job will be messy so protective clothing and eye-wear is a
must and when using power tools, please follow all safety instructions provided.
Also, have you programmed all of your pets in to the Pet Door? If not, we advise you
complete this process prior to fitting.
Tools and supplies required
Ruler & Spirit level
Blu tack
Sharp pencil
Vacuum cleaner
Calculating the number of tunnel extenders
10mm
50mm
Installation video tutorials can be found at surepetcare.com/support
1
All-weather tape
Wall plugs & screws
Cross head screwdriver
Clear all-weather sealant
For wall installations, tunnel extenders can be stacked together to create
a longer tunnel for the Pet Door. The existing tunnel is 70mm (2 3/ 4 ") long.
Each tunnel extender adds 50mm (2") to the length of the tunnel. You
will need to purchase enough tunnel extenders to
your wall + 10mm - the last extender needs to stick out by at least 10mm
(3/ 8 ") for the external frame to rest on.
accessory
Pet Door Tunnel Extenders
Electric drill & masonry bits
Protective clothing & eye-wear
Appropriate power tools for your wall
span the thickness of
EN
Werbung
