philrouge EOS Montage- Und Bedienungsanleitung Seite 11

Fixed Boxspring
1. Assembling the feet
Number of feet
Boxspring single bed (80/90/100/120/140 cm)
Set of 5 feet and 1 middle foot
Boxspring double beds (160/180/200 cm)
Set of 4 feet and 1 middle foot (per box)
18
FR FR
EN EN
Fixed Boxspring
1. Assembling the feet
1.1 Place Box 1 either on the long side or flat on the
top side and note the position of the Velcro fastener.
A Velcro fastener which prevents the boxes from
drifting apart is provided at the foot end.
1.2 Screw feet into foot socket «A» or «B», and
middle foot into socket «D». Attention: One middle
foot is required for each box.
D
C
B
A A
1.3 Screw head section fitting (with the bracket
featuring the slotted holes) into one of the bore holes
«E» using the machine screws (001) and tighten
slightly. Please use the hole that is further away from
the Velcro fastener in each case. This will ensure
that the fittings will sit in the respective outer hole
in the end. With single beds, use both holes «E».
Then fasten at the front using the wood screws
(002). Next fasten tightly at the bottom side.
1.4 Then set up Box 1.
E
1.5 Assemble Box 1 in the same way as Box 2
E
and place Box 2 next to Box 1.
FR FR
EN EN
19