Switching Off - Bartscher HI LITE Bedienungs- Und Wartungsanleitung

SALAMANDER WITH THREE HEATING ELEMENTS
SWITCHING ON:
- Switch off mains switch upstream of appliance.
- Turn knob (6) to position 1.
- Set the cooking time (15 sec. to 15 min) by rotating knob (5). The set time will be
shown on display (4)
- Select the heating element by pressing button (1).
In the version with 3 heating elements, if light (2) is on, the central resistance goes on
and off at regular intervals during cooking.
In the version with 4 heating elements, if light (2) is on, the two central resistances go
on and off at regular intervals during cooking.
This system for switching on and off central resistances guarantees uniform heat
distribution over the entire appliance surface.
- Press button (2) to start the cooking session.
- At the end of the set cooking time the salamander will switch off automatically and the
buzzer will go off. Press button (3) to switch it off.
N.B.:
- By pressing button (2) again, the salamander will start a new cooking session just like
the one previously set.
- The salamander will switch off with no buzzer by pressing button (3) during the cooking
session.

SWITCHING OFF

- Press button (3).
- Set knob (6) to position 0.
- Switch on the switch upstream of the appliance.
18