Stage 1: Baby; Carrycot - Mima xari Gebrauchsanleitung Und Gewährleistung

11
12
14

STAGE 1: BABY

CARRYCOT

• When using
xari
months, we recommend using the supplied carrycot
until the child can sit unaided.
11. Set up carrycot
Zip open the seat and take out the carrycot.
Push the two flaps underneath the carrycot tube.
Place the mattress inside the carrycot and attach the
safety bar (see fig
12. Adjust carrycot angle
It is easier to fit the carrycot onto the chassis if the
attachment brackets are in position III, pointing straight
downwards. To achieve this pull the angle adjustment
lever and rotate the brackets. The carrycot angle can also
be adjusted when fitted to the chassis.
13. Attach carrycot
Position the carrycot so that the angle adjustment lever
is at the front end of the stroller. Lower the carrycot onto
13
the chassis until it clicks in place.
14. Remove carrycot
Press the two buttons on both sides of the carrycot and
lift it up.
15. Adjust height of carrycot
• There are two height positions for the carrycot.
Press the height adjustment buttons on both sides of the
chassis and move the carrycot up or down.
16. Collapse carrycot
Remove the mattress and the safety bar. Release the
15 sideflaps from the carrycot frame. Open the seat and
position the collapsed carrycot inside the seat. Align the
angle adjustment lever with the hole in the rear shell of
the seat. Make sure the seat brackets stay out of the seat.
16
for children under the age of 6
25).
EN
7