Stage 1: Baby; Carrycot - Mima XARI Bedienungsanleitung

12
14
15 15
BASKET COVERS
12. Attach front basket cover to chassis
Click the snap buttons on both sides of the front basket
cover onto the studs of the chassis.
13. Attach rear basket cover to chassis
Zip the rear basket cover onto the rear basket.
Fix the elastic band on the inside of the rear basket cover
13
to the basket by using the snap button.

STAGE 1: BABY

CARRYCOT

• IMPORTANT: Carrycot must only be used in POSITION
III, horizontal position. The canopy must be fitted at all
times.
8
• When using
months, we recommend using the supplied carrycot
until the child can sit unaided.
14. Set up carrycot
Zip open the seat and take out the carrycot. Push the two
flaps underneath the carrycot tube. Place the mattress
inside the carrycot and attach the safety bar (see
15. Adjust carrycot angle
It is easier to fit the carrycot onto the chassis if the
attachment brackets are in position III, pointing straight
16
downwards. To do this, pull the angle adjustment lever
and rotate the brackets. The carrycot angle can also be
adjusted when fitted to the chassis.
16. Attach carrycot
Position the carrycot so that the angle adjustment lever
is at the front end of the stroller. Lower the carrycot onto
the chassis until it clicks in place.
for children under the age of 6
xari
EN
fig 27).
9