Care And Maintenance - Mima xari Gebrauchsanleitung Und Gewährleistung

CARE AND MAINTENANCE

• To keep in perfect condition please go through the
xari
following steps regularly.
• Fabrics and plastics conform to the highest grade of
colourfastness. But excessive exposure to the sun can
cause premature fading of plastics and fabrics.
CHASSIS CLEANING
Wash off sand and salt after visiting the beach.
Brush off excessive dirt. Then wipe clean with a moist
cloth and a mild cleaning agent
LUBRICATING MOVING PARTS
Periodicly lubricate the wheels, hinges and other sliding
parts using a light oil or silicon spray. Do not use heavy
oil as this will attract dust and grit which tend to clog and
damage moving parts.
SEAT CLEANING
The rigid seat can be wiped clean with a moist cloth and a
mild cleaning agent. More resistent marks can be rubbed
away using a pencil eraser.
The seat cushion and shoulder pads can be removed (see
fig. 17) and must be washed by hand.
Please note the following:
- maximum temperature 30°C / 85°F
- do not bleach
- do not tumble dry
- do not iron
- do not dry clean.
CHECK OTHER PARTS
From time to time check xari
torn material and loose stitching.
Contact your retailer if parts need to be replaced or repair
the parts as needed.
for loose screws, worn parts,
EN
11