Options; Before First Use - AEG FFB62620PW Benutzerinformation

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
7.1 XtraDry
Activate this option when you want to
boost the drying performance. With use
of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The XtraDry option is a permanent
option for all programmes other than
and need not to be selected at
every cycle.
Every time
option is off and needs to be chosen
manually. In other programmes, the
setting of XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Activating XtraDry option deactivates
TimeSaver.
How to activate XtraDry
Press Option until the indicator
comes on.
The display shows the updated
programme duration.

8. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
is activated, XtraDry
7.2 TimeSaver
The TimeSaver allows to reduce the
duration of a selected programme by
approximately 50%.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
By default, TimeSaver is off, but it is
possible to activate it manually. This
option cannot be combined with
XtraDry.
How to activate TimeSaver
Press Option until the indicator
If the option is not applicable to the
programme, the related indicator is off
or it flashes quickly for a few seconds and
then goes out.
The display shows the updated
programme duration.
7.3 ExtraHygiene
This option provides better hygiene
results by keeping the temperature at 70
°C for at least 10 minutes during the last
rinsing phase.
How to activate ExtraHygiene
Press Option until the indicator
If the option is not applicable to the
programme, the related indicator is off
or it flashes quickly for a few seconds and
then goes out.
The display shows the updated
programme duration.
not, adjust the level of the water
softener.
2. Fill the salt container.
ENGLISH 11
is on.
is on.