Specifications - AKG C562 CM Bedienungsanleitung

Type:
Polar pattern:
Frequency response:
Sensitivity at 1000 Hz:
Max. sound pressure level for 1% THD:
Equivalent noise level to IEC 60268-4 (A-weighted):
S/N ratio re 1 Pa (A-weighted):
Electrical impedance:
Recommended load impedance:
Powering:
Current consumption:
Connector:
Size:
Net weight:
This product conforms to the standards listed in the related Declaration of Conformity. To order a free copy of the Declaration
of Conformity for this product, visit http://www.akg.com or contact sales@akg.com.
Frequency Response
Dimensioned Drawing
C 562 CM
condenser microphone (self-polarized)
omnidirectional (hemispherical)
20 Hz to 20 kHz (installed in very large boundary)
20 mV/Pa (-33 dBV) re 1 V/Pa (measured on 1.5 x 1.5 m
boundary)
130 dB SPL
16 dB(A)
78 dB
≤ 600 ohms
≥ 2000 ohms
9 to 52 V phantom power to IEC 61938
approx. 2 mA
phantom power adapter with integrated male 3-pin XLR
connector
0.8 dia. x 0.12 (1.1) in. (20 dia. x 3 (28) mm)
approx. 1.1 oz. (30 g) (without cable)

6 Specifications

Polar Diagram
17