AKG C562 CM Bedienungsanleitung Seite 16

Example 3:
Conference room
Fig. 5: Installation in a confer-
ence table and ceiling.
Refer to fig. 5.
More hints
Fig. 6: Minimizing sound
pickup from unwanted
sources.
Refer to fig. 6.
Fig. 7: Reducing
mechanical noise.
Refer to fig. 7.
16
• In a conference room, you can install either a single microphone in a conference table
or one or more microphones in a reflective ceiling panel.
• The hemispherical polar pattern may cause unwanted sounds from unexpected direc-
tions to be picked up. Unless the boundary is too large or permanently installed, simply
turn the panel with the microphone away from the unwanted source.
Alternatively, you can place suitably sized (4x4 ft. / 1x1 m) plexiglass panels or thick-pile
carpet between the microphone and the unwanted sound source(s).
• You can reduce mechanical noise to a minimum by placing a layer of sound absorbing
material (e.g., soft foam) beneath the reflective panel.
C 562 CM