Oki IP-5620 Schnellreferenz Seite 34

5
Pull softly the tail section of the ink cartridge.
6
Install the cartridge holder cover.
Insert the three protrusions of the cartridge holder
cover in the cartridge holder holes.
Hook the cartridge holder cover to the claws to
secure it.
Note
- Make sure that the board protective sheet does not
get between the cartridge holder and the cartridge
holder cover.
7
Insert the tail section fixing plate hooks into
the ink cartridge tail section holes to attach it.
Note
- Do not apply an excessive force as the ink cartridge
holes may be deformed.
8
Hook the tail section fixing plate to the
cartridge holder claws.
9
Remove the board protective sheet.
Note
- Be sure to remove the board protective sheet.
Installing the ink cartridge to the printer without
removing the board protective sheet may cause a
malfunction.
10
Insert the reloadable ink cartridge into the
slot.
Note
- Check that the color on the ink cartridge tail section
label and the color on the ink box label are the
same.
- Do not push strongly the tail section fixing plate
toward the inside.
- The Ny (neon yellow) cartridge must be inserted in
the slot with the Lc label, and the Np (neon pink)
cartridge in the slot with the Lm label.
33