Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
During the reference move,
cated, and then the previous operating mode will
be continued.
To reset all settings of the WASH-400LED to
the factory settings (
ter 10.2):
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
PRO defaults
and press the button ENTER
to call up this menu item.
3) Use the button
or
4) Press the button ENTER.
5) To exit the menu, keep the button MENU
pressed for more than one second.
Any setting changed will not take effect before the
menu has been exited.
9.11 Indicating the internal temperature
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
Temp.
and press the button ENTER to call up
this menu item. The internal temperature of the
unit will be indicated.
3) To return to the main menu, press the button
MENU or ENTER.
4) To exit the menu, keep the button MENU
pressed for more than one second.
9.12 Indicating the operating time
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
Fixture Time
and press the button ENTER
to call up this menu item. The operating time of
the unit will be indicated.
3) To return to the main menu, press the button
MENU or ENTER.
4) To exit the menu, keep the button MENU
pressed for more than one second.
9.13 Indicating the firmware version
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
Firmware Version
ENTER to call up this menu item. The firmware
version (operating system of the unit) will be
indicated.
CM-150
will be indi-
values in bold in chap-
to select the menu item
No
will be indicated.
to go to
Yes
.
to select the menu item
to select the menu item
to select the menu item
and press the button
3) Use the button
or
various details.
4) To return to the main menu, press the button
MENU or ENTER.
5) To exit the menu, keep the button MENU
pressed for more than one second.
9.14 Readjusting the moving head position
To position the moving head, a fine adjustment is
possible:
1) In DMX mode, set the moving head to a position
ideal for adjustment.
2) Press the button menu to call up the setting
menu.
3) Keep the button ENTER pressed for more than
3 seconds.
Pan Offset
4) To readjust the pan angle, press the button
ENTER. Use the button
position (
-127
to
127
ENTER.
5) To readjust the tilt angle, use the button
to go to
Tilt Offset
ENTER. Use the button
-127
127
position (
to
ENTER.
6) To return to the main menu, press the button
MENU.
7) To exit the menu, keep the button MENU
pressed for more than one second.
10 Specifications
Data protocol: . . . . . . . . . DMX 512
Number of
DMX channels: . . . . . . . . selectable: 1, 9, 12, 14,
Light source: . . . . . . . . . . 7 × 10 W RGBW LED
Illuminance at a
distance of 1 m: . . . . . . . 55 000 lx
Beam angle: . . . . . . . . . . 12°
Power supply: . . . . . . . . . 230 V~/50 Hz
Power consumption: . . . . 130 VA max.
Amblent temperature: . . . 0 – 40 °C
Dimensions: . . . . . . . . . . 260 × 300 × 160 mm
Weight: . . . . . . . . . . . . . . 5.8 kg
Subject to technical modification.
to switch over between
will be indicated.
or
to readjust the
). Then press the button
or
and press the button
or
to readjust the
). Then press the button
16 or 28
(Cree)
GB
23
Werbung
Kapitel
Inhaltsverzeichnis
