Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.2 Inverting the tilt direction
To match the tilt direction of the spotlight, for exam-
ple, to other jointly controlled spotlights:
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
Tilt Inverse
and press the button ENTER
to call up this menu item.
3) Use the button
or
tion is to be inverted (
4) Press the button ENTER.
5) To exit the menu, keep the button MENU
pressed for more than one second.
9.3 Blackout function
In the absence of a DMX signal, the blackout func-
tion will black out the light and return the moving
head to its mid-position. Always deactivate the
blackout function when operating the WASH-
400LED without DMX control.
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
Black Out
and press the button ENTER to call
up this menu item.
3) Use the button
or
function is to be activated (
4) Press the button ENTER.
5) To exit the menu, keep the button MENU
pressed for more than one second.
9.4 Adjusting the dimming behaviour
Four different functions are provided to convert the
DMX signals into LED brightness and thus define
the dimming behaviour.
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
Dimmer Curve
and press the button ENTER
to call up this menu item.
3) Use the button
or
mer curve:
Mode 1
linear conversion
DMX value
to select the menu item
to define if the tilt direc-
Yes
No
) or not (
).
to select the menu item
to define if the blackout
Yes
) or not (
No
).
to select the menu item
to select the desired dim-
Mode 2
finer adjustment at low
brightness levels
DMX value
Mode 3
finer adjustments at high
brightness levels
DMX value
Mode 4
finer adjustment at high and
low brightness levels, coarser
adjustment at medium bright-
ness levels
DMX value
4) Press the button ENTER.
5) To exit the menu, keep the button MENU
pressed for more than one second.
9.5 Colour balance / white balance
The balance between the three primary colours
red, green and blue may be shifted which will also
change the light colour of combined white light (if
the three colours are used in addition to the white
LEDs). Thus, differences to other spotlights will be
compensated if the WASH-400LED is controlled
together with these spotlights.
To set the correction values:
1) Press the button MENU to call up the setting
menu.
2) Use the button
or
White Balance
to call up this menu item. The moving head will
go to its mid-position.
3) Use the button
or
adjusted:
Red
maximum value of red
Green
maximum value of green
Blue
maximum value of blue
4) Press the button ENTER. The value below the
name of the colour starts flashing.
5) Use the button
or
mum value (
125
to
ENTER to confirm.
Repeat steps 3) to 5), if required.
to select the menu item
and press the button ENTER
to select the colour to be
to set the desired maxi-
255
) and press the button
GB
21
Werbung
Kapitel
Inhaltsverzeichnis
