Contents
GB
1
2
3
Applications . . . . . . . . . . . . . . . . . . . . . . . 17
4
Installation . . . . . . . . . . . . . . . . . . . . . . . . 17
5
6
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 18
7
8
DMX Control . . . . . . . . . . . . . . . . . . . . . . 19
9
16
All operating elements and connections de -
scribed can be found on page 2.
1
Operating Elements
and Connections
1 Carrying handles
2 Status LEDs
DMX
lights up when DMX control signals
are received
MASTER lights up when the unit is operated
independently (as a master unit)
SLAVE
lights up when the unit is operated
as a SLAVE unit
SOUND
lights up with every control pulse
when the unit is music-controlled
3 Control buttons
MENU
to call up and to exit the setting
menu, to exit the menu, keep the
button pressed for more than 1 sec-
ond
,
to select a menu item and to change
a setting
ENTER
to call up a menu item and to save a
setting
4 LC display
5 Mains cable for connection to a socket
(230 V~/50 Hz) via the mains cable provided
6 Support for the mains fuse
Always replace a blown fuse by one of the same
type.
7 Mains jack OUTPUT to connect another light
effect unit
8 Jack to connect the cable remote control LC-3
(optional)
9 Jack to connect the receiver of the wireless
remote control LC-9RTX (optional)
10 DMX signal input (3-pole XLR) to connect a light
controller;
Pin 1 = ground, 2 = DMX-, 3 = DMX+
11 DMX signal output (3-pole XLR) to connect the
DMX input of another DMX light effect unit;
Pin 1 = ground, 2 = DMX-, 3 = DMX+
12 Eyebolt to attach a safety rope
13 Mounting screws (hexagon socket screws) for
the mounting bracket
14 Mounting bracket
15 Microphone for music control