Inhaltsverzeichnis
Werbung
- TYPE B -
B. TO DELETE SELECTED PATTERN
1. If you selected undesired pattern, press
the clear (C) button short time (less than
0.5 sec.).
Machine will delete the last selected
pattern.
2. If you want to delete all patterns, press
the clear (C) button long time (over 0.5
sec.).
Machine will delete all selected patterns.
C. TO CHECK SELECTED PATTERNS
You can check selected patterns as
following.
1. Press the read (R) button.
Last selected pattern will be highlighted.
2. Press the cursol (<) button.
Highlight will move one pattern to the left.
3. Check selected patterns by pressing
cursol (<) or (>) button.
4. Press the read (R) button again to return
to selecting mode.
D. ADJUSTING STITCH LENGTH AND
WIDTH
You can adjust the stitch width and length of
each decorative pattern.
1. Press the read (R) button.
2. Select the pattern (highlight) you want to
adjust by pressing the cursol buttons.
3. Press the length / width button until the
mode you want to adjust will appear.
Mode a. Stitch Length can be adjusted.
Mode b. Stitch Width can be adjusted.
Adjust each setting by pressing the up
(+>>) or down (<<-) button.
The procedures to adjust them are same
as adjusting utility stitch, see page 15 to
adjust the lengh and width.
Note:
The letter patterns and some decorative
patterns can not change the length and
width. In this case, the mark c will appear.
4. Press the read (R) button again to return
to selecting mode.
48
Werbung
Inhaltsverzeichnis
