Switching The Appliance On; Setting The Temperature; Selecting The Temperature; Fan Button - Gaggenau RW 404 Gebrauchsanleitung

Switching the appliance on

▯
Plug in the mains plug.
▯
Keep the On/Off button pressed until the
temperature display lights up.

Selecting the temperature

The temperatures in both compartments can be set
independently of each other from +5 °C to +20 °C.
▯
Press the top or bottom compartment selection
button. The corresponding temperature display
flashes.
Change the temperature at the + and – buttons.
▯
Button + raises the temperature (warmer)
Button – lowers the temperature (cooler)
Each press of the button changes the temperature
by 1 °C.
About five seconds after a button is last pressed the
electronics module switches over automatically and
the actual temperature is displayed.

Fan button

The fan button should be activated when wine is to
be stored over the long term.
The fan symbol appears on the display.
This gives rise to an interior climate typical of a wine
cellar.
The raised air humidity prevents the corks from drying
out.

Temperature alarm

The acoustic warning signal helps protect your wine
from incorrect temperatures.
It sounds when it is too cold or too warm in the
interior. At the same time the temperature display
flashes.
It always sounds when the door is open for longer
than sixty seconds.
▯
Press the alarm-off button to switch off the alarm.
The temperature display continues flashing until
the alarm status has ended.
27