Klarstein 10033112 Bedienungsanleitung Seite 22

EN
22
indicates that the timing is on currently and the control temperature is the
temperature setting.
indicates that the timing is on currently and the control temperature is the
temperature setting minus 3 °C, No display indicates timing is off current
and the heating elements do not work.
Press 2x: it displays "2" , set the parameters for Tuesday.
...
Press 7x: it displays„7" for Sunday.
Press 8x: Exit settings and recover to the current weekday
Press 1x: Turn on timing function.
The indicator an the appliance.
Press 2x: Turn timing function off.
After the timing function is turned on, it works according the parameter
settings. The LCD screen
correspoinding parameter settings.
Note: when the time, week and timing parameters are changed, you need
to switch on-off the timing key to transfer the timing parameters to the
machine. After the machine has received them correctly, the buzzer will
beep once.
Press 1x: Press once to turn on the Open Window function, the LCD screen
displays . icon, the indicator
to turn it off.
After the Open Window function is turned on, the program firstly detects
if the heating function is turned on. If it is turned on, the program will save
the current ambient temperature value and detects the ambient temperature
change once per 12 minutes. When the decrease in the ambient
temperature detected within 30 minutes exceeds 4 °C ,the program will
deem that the window is open and stop heating, and the Open Window
indicator on the machine will flash rapidly. After it has stopped heating
for 70 minutes, the program starts to detect if the window is closed, and
the indicator flashes slowly. It heats for 6 minutes every 30 minutes
(at 1900W). If the temperature rise is more than 2 °C, the window is
considered as closed, and the indicator
lights green.
lights off.
lights up according to
on the machine lights yellow. Press again
stops flashing.