Ice Machine; Icematic; Ice Container - Beko GNE480E20DZXP Bedienungsanleitung

Operating the product

5.3. Ice machine

(This feature is optional)
Ice machine allows you to obtain ice from the
product easily.
Using the ice machine
1. Remove the water tank from the fridge compartment.
2. Fill the water tank with water.
3. Replace the water tank. First ice cubes will be ready
in approximately four hours in the ice machine drawer
located in the freezer compartment.
C
While the water tank is completely
filled, you will be able to obtain
approximately 60-70 ice cubes.
C
The water within the tank should be
renewed in every 2-3 weeks.

5.4. Icematic

(This feature is optional)
Icematic allows you to obtain ice from the product
easily.
Using the icematic
1. Take out the icematic pulling it out carefully.
2. Fill the icematic with water.
3. Place the icematic in place. About two hours later,
the ice is ready.
4. To obtain ice, turn the knobs on the ice reservoirs
clockwise by 90˚ degrees. Ice cubes in the reservoirs
will fall down into the ice storage container below.
5. You may take out the ice storage container and
serve the ice cubes.
C
Do not remove the Icematic from its
seating to obtain ice.
C
If you wish, you may keep the ice
cubes in the ice storage container.
The ice storage container is just for
accumulating ice cubes. Do not put
water in it. Otherwise, it will break.

5.5. Ice container

(This feature is optional)
Icematic allows you to obtain ice from the product
easily.
Using the ice container
1. Remove the ice container from the freezer
compartment.
2. Fill the ice container with water.
3. Place the ice container in the freezer
compartment. About two hours later, the ice is
ready.
4. Remove the ice container from the freezer
compartment and bend it over the service plate. Ice
cubes will easily fall down to the service plate.
20 / 31 EN
Refrigerator / User Manual