Safety - Amprobe ACF3000 AK Bedienungshandbuch

Safety

1 SAFETY
The following symbols appear on the products:
Attention! Refer to Manual
Double/Reinforced Insulation
Read all instructions completely before using this product.
To avoid electric shock:
• Use caution during installation and use of this product; high voltages and
currents may be present in circuit under test.
• This product must be used only by qualified personnel practicing
applicable safety precautions.
• Wear protective clothing and gloves as required.
• Do not install this product on live conductors.
• Always de energize circuit under test before installing flexible measuring
head. Always inspect the electronics unit, connecting cable, and flexible
measuring head for damage before using this product.
• Do not use product if damaged.
• Always connect electronics unit to display device before installing the
flexible measuring head.
• Never change batteries while measurement head is installed on
conductor.
1