Troubleshooting - Panasonic EH-XS01 Betriebsanleitung

Troubleshooting

Problem
No steam is produced even about
1 minute or more after the power is
turned on.
The amount of steam has decreased.
• While the steam is being produced, its
colour gets lighter and it is hard to see.
• There are hot water droplets flying
out with the steam.
There is a hissing sound while the
steam is being is produced.
Water leaks from the water outlet.
The power plug is abnormally hot.
If the problems still cannot be solved, contact the store where you purchased the unit or a service centre authorized by Panasonic for
repair.
PB014676 - EH-XS01 _EU(01EN)_04-26-17.indd 13
Possible cause
The power plug or appliance plug is not
plugged all the way in.
There is no water in the water supply
tank.
The steamer is not on a level surface.
The steamer is tilted.
The lid is off.
There are calcium carbonate or limescale
deposits inside the steamer.
You are using something else mixed in
with the water.
The sound is due to electrical discharge
and is not a problem.
The water supply tank has been attached
and removed repeatedly.
The steamer is tilted.
The power plug is not firmly inserted into
the outlet.
Action
Plug the power plug and appliance
plug securely all the way in.
Let the steamer cool down for at least
10 minutes, then supply water. (See
page 9.)
Place the steamer on a desk or other
flat surface.
Attach the lid. (See page 12.)
Contact an authorized service centre
for repair.
Let the steamer cool down for at least
10 minutes, then clean the inside of
the steamer. (See page 11.)
Throw out the water inside the
steamer, then press down on the
water supply tank with the water in it
until a click is heard.
Set the steamer so that it is flat.
Use an outlet in which the power plug
fits snugly.
13
2017/4/26 9:02:43