Intermediate Position - Becker Centronic VarioControl VC470-II Montage- Und Betriebsanleitung

Intermediate position II
Application
Awning operation
Venetian blind operation
Note
This function allows you to open the curtain from the lower limit position
until the desired intermediate position II is reached. Both limit positions
must be set before the intermediate position II is set.
a) Setting the intermediate position II
1. Travel the curtain from the lower limit position to the desired intermediate
position II.
2. Press the STOP button and, within 3 seconds, also press the UP button and
hold the two buttons down.
The curtain shifts to confirm.
The intermediate position II is now saved.
b) Checking the intermediate position II
1. Press the UP button twice within one second.
The curtain runs to the intermediate position II.
c) Deleting the intermediate position II
1. Travel the curtain to the intermediate position II.
2. Press the STOP button and, within 3 seconds, also press the UP button and
hold the two buttons down.
The curtain shifts to confirm.
The intermediate position II is now deleted.
Information for blind operation
If an intermediate position II is saved, the blind will run to this position
after travelling to intermediate position I. If there is no intermediate
position I saved, the blind will run to intermediate position II after the
running time has elapsed.
Function
Cloth tension
Turning
de
en
fr
nl
25