Listen To Music Via Bt; Move The Device - Klarfit Vibe Go Bedienungsanleitung

Speed rapid
Press one of the speed buttons (10 or 20) to quickly increase the vibration
speed to level 10 or 20.
PRG Fashion
Manual mode is set by default. Press the PRG button to switch to automatic
mode. Press the button repeatedly to select programs P1, P2, P3 or P4
(automatic) or 88 (manual). The speed levels and times are preset in programs
1-3. In program 4 you cannot change the speed and time. In program 88
(manual) you can change either the speed or the time (but not both at the same
time).
Note: The effective range of the remote control is 2.5 meters. The remote
control's infrared transmitter must be pointed at the infrared receiver on
the vibration plate during operation.

LISTEN TO MUSIC VIA BT

Start BT on your smart device and then start the search for other BT devices.
In the BT list, search for the device with the name [Klarfit] and connect both
devices. You can now listen to music via the integrated loudspeaker of the
vibration plate.
Note: When you switch on the vibration plate, BT is automatically
activated.

MOVE THE DEVICE

If you need to move the unit, hold it in the middle of the side as shown in the
picture.
EN
23