Control Panel And Indicators; Remote Control Functions - Klarfit Vibe Go Bedienungsanleitung

EN

CONTROL PANEL AND INDICATORS

Calories Speed Time
Vibration speed (intensity)

REMOTE CONTROL FUNCTIONS

Start/Stop
After you have connected the device and switched
it on, press this start button to put it into operation.
Press the Stop button when the unit is running to stop
it.
Time+
The default setting is 10 minutes. The time can be
increased in 10 steps.
Time-
The default setting is 10 minutes. The time can be
reduced in 10 steps.
Speed high
Press the button in manual mode to increase the
vibration speed (intensity) in 20 steps.
Speed low
Press the button in manual mode to reduce the
vibration speed (intensity) in 20 steps.
22