Installation Instructions; Before You Start - wiking Atlantic Bedienungsanleitung

Installation Instructions

Before You Start

Figure  is a cross-sectional view of your wood-burning stove. Here
you can gain an overview of the parts of which your stove consists.
Steel smoke deflector.
.
Vermiculite smoke deflector.
2.
3. Vermiculite rear plate.
4. Air intake on the rear plate (secondary air).
5. Vermiculite base plates.
6. Grate.
Air-regulation damper (primary air and pane-flushing).
7.
8. Lighting mechanism.
Please note: The combustion chamber is covered with plates made of vermiculite, which is
a heat-insulating material. These plates ensure that the optimal combustion temperature is
quickly reached, and they must therefore remain inside in the wood-burning stove.
The steel smoke deflector and the vermiculite smoke deflector ensure that the passage of
smoke through the stove is as long as possible, so that the flue gasses have more time to
emit their warmth within the stove and the surrounding area. In this way you get more warmth
from the wood you add to the stove, as the warm smoke is not simply sent out through the
chimney.
Arrangement of Individual Components
It is important to ensure that all individual components are in place and no damage was done
to them during transport. In Figure  you can see where the parts should be located in the
stove. The individual components that you must inspect are:
The vermiculite smoke deflector should rest on the side plates and be pushed all the way
.
back in the combustion chamber.
2. The rear plate must be pushed all the way back in the combustion chamber.
The base plates must lie flat on bottom around the grate.
3.
Only when you are confident that the individual components are in place, you may begin with
the installation of the wood-burning stove.
WIKING Atlantic snit
English
5
7
8
Fig. 1
1
2
4
1 1
3
6
2