RT700i/RT730i BENUTZERHANDBUCH
FCC COMPLIANCE STATEMENT
FOR AMERICAN USERS
This equipment has been tested and found to comply with the limits for a CLASS A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at own expense.
EMV-KONFORMITÄTSERKLÄRUNG
FÜR EUROPA
Dieses Gerät wurde geprüft und entspricht den Anforderungen der Normen EN55022:2010 Class A, EN61000-3-2:2006/
A1:2009/A2:2009, EN 61000-3-3:2008, EN55024:2010, IEC 61000-4-2:2008 Reihen. Das Gerät wurde außerdem hinsichtlich der
Grenzwerte für gestrahlte und geleitete Störaussendungen geprüft und enspricht den Anforderung der Europäischen
Norm EN 55022.
DIE THERMO-ETIKETTENDRUCKER DER SERIE RT700I,
AUF DIE SICH DIESE ERKLÄRUNG BEZIEHT,
ENTSPRECHEN DEN ANFORDERUNGEN FOLGENDER NORMEN:
IEC 60950-1:2005(2nd Edition)+Am 1:2009, CB9254-2008 (Class A ) ; GB17625. 1-2003; GB4943.1-2011, EN55022:2010 Class A,
EN61000-3-2:2006/A1:2009/A2:2009, EN 61000-3-3:2008 and EN55024:2010, IEC 61000-4-2:2008 series, UL 60950-1, 2nd Edition,
2011-12-19, CSA C22.2 No. 60950-1-07, 2nd Edition, 2011-12, CFR 47, Part 15
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may
be required to take adequate measures.
Product name:
Thermal Label Printer
Model Number: RT700i
Local Service Center Phone #
+886-2-2225-8580
Godex International Co., Ltd.
KCC-REM-GDX-RT700i
Bitte beachten Sie
- Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Nur vom Hersteller empfohlenen Batterietyp verwenden.
- Altbatterien gemäß den Herstellervorgaben entsorgen.
- Gerät nur mit dem mitgelieferten Netzteil-Modell verwenden.
- Bei Veränderungen oder Modifikationen, die nicht ausdrücklich von der für die Konformität zuständigen Stelle
zugelassen sind, kann dem Benutzer das Betreiberrecht für das Gerät entzogen werden.
DEKLARATION