Motorola GMLN5075 Installationsanleitung Seite 8

68012009097.book Page 6 Tuesday, May 21, 2013 11:44 AM
VEHICULAR CHARGING CRADLE/RADIO
HOLDER INSTALLATION
Note: Always use the supplied fastening hardware to rigidly
secure the cradle. An unsecured cradle could cause a unit
to move and interfere with the proper operation of the
vehicle and the charging cradle/radio holder must be
mounted in such a way that the TETRA Handportable
terminal is within easy reach of the driver during normal
operation of the vehicle.
Sufficient room should be allowed to permit the insertion of
the TETRA Handportable terminal and provide easy access
to the release mechanism of the TETRA Handportable
terminal from the cradle/holder.
PMLN5547/
PMLN6611(LED)
charging cradle
or PMLN5588
radio holder
Figure 2. When installing the cradle, use the following
procedure or modify to suit the particular vehicle
Mounting Bracket
Hinge Screw
Wipe clean flat
surface before using
6
M4x10 mm
Screw (x4)
#8x.625" Self
Tapping Screw
(x4)
adhesive pad