Default Parameters; Programming The Clock; Configuring The Display - Lowara SM30 BSETF3 Programmierhandbuch

en
4 REL.OUT4 CONFIG
5 REL.OUT5 CONFIG
6 REL.OUT6 CONFIG

6.2.14 DEFAULT PARAMETERS

Phase Display
0 DEFAULT
1 DEFAULT PARAMETER Loads all the default parameters (factory

6.2.15 PROGRAMMING THE CLOCK

Phase Display
0 REAL TIME CLOCK
1 SET DATE
2 SET HOUR

6.2.16 CONFIGURING THE DISPLAY

Phase Display
0 DISPLAY
1 AI1 DISPLAY
2 AI2 DISPLAY
3 HOUR/DATE DISPL.
4 BARGRAPH
6.2.17 SOFTWARE
Phase Display
0 SOFTWARE
1 VERSION
50
Allows you to configure the OUT_4
relay of the RILS6 optional board
Allows you to configure the OUT_5
relay of the RILS6 optional board
Allows you to configure the OUT_6
relay of the RILS6 optional board
Comment
setting)
Comment
Setting the date
Setting the hour and the minutes
Comment
The display shows the value of AI1
The display shows the value of AI2
The display shows the value of the date
and time
Enables display of the indicating bar on
input selected as feedback.
Available only on systems with sensors.
Comment
Only reading of program loaded and
release number
See THERMAL
configuration 1 PR.
See LEVEL
configuration 1
See POWER ON
configuration 1
Field
YES
NO
Field
Day
Month
Year
Hour +
Minutes
Field
YES YES
NO
YES YES
NO
YES NO
NO
YES NO
NO
Field Default
BSETF3
REL .01
Default
Default
Default