Conrad N150 Bedienungsanleitung Seite 67

• The following examples are to make confi guration easier for you.
Assume that the router has the IP address 192.168.10.1 and the DHCP range is to be limited
to 192.168.10.100 to 192.168.10.200.
Then change the address as shown on the next image.
Each block of the IP address must be in the range between 1 and 254.
• You need to enter the changed
IP address into your browsers
address line accordingly if you
want to access to web interface.
Please note:
Once the product recognises a DHCP server in the network, the integrated one
is deactivated. However, this only applies for the operating mode "Bridge". The
DHCP server is always active in the two other operating modes.
You can adjust the IP address and the DHCP area as you wish here.
67