Conrad N150 Bedienungsanleitung Seite 65

• Check the assumed settings in the main window and enter the password for the selected
WLAN in the fi eld "Pass Phrase" at the bottom.
Click the button "Apply" to save the settings. A restart is performed.
Please note:
If the IP-address has changed, you need to log on to the web interface again after
the restart. For this, enter the changed IP address into the address line of the
browser. It may also be necessary to disconnect your PC from the network briefl y
fi rst to have a new IP address assigned to it. You may also restart your PC.
Also observe chapter 12 a) on how to change the IP address.
• If desired, you may also change other settings now. Also observe chapter 12 of these operat-
ing instructions on this.
• Confi guration is now complete. Now you can install the device in the place desired by you as
described in chapter 13.
65