Commissioning - Conrad N150 Bedienungsanleitung

7. Commissioning

The product is intended for the outdoor area. Therefore, we recommend performing the confi gu-
ration before installing the access point at its destination.
• Unpack the device and accessories fi rst.
• Remove the lid from the main device. For this, exercise slight pressure at the top (black dot in
the image) and then pull it away downwards.
• Next connect the socket "POE" (13) of the PoE adapter to the LAN-port (3) at the device with
an 8-pin 1:1-connected network cable.
• Now also connect a 1:1-connected network cable to the socket "LAN" (14) at the PoE adapter
and a free LAN port of your computer.
• Connect the plug-in mains adapter to the "DC" (12) connection of the PoE adapter and con-
nect it to a mains outlet.
Both the power LED at the main device and at the PoE adapter should light up.
• If you have not done so yet, start your PC and wait until your operating system has booted
completely.
49