Confi Guration Of The Operating Mode "Bridge - Conrad N150 Bedienungsanleitung

9. Confi guration of the Operating Mode "Bridge"
This chapter describes the basic confi guration of the operating mode "Bridge". This mode is
used to operate the product as an access point at a present router.
At delivery or after reset, the device is pre-set to the operating mode "Bridge".
If you have already confi gured the product differently, perform a reset as described in chapter
14 fi rst.
Once you have performed the connection as described in chapter 7, you can start confi guration
immediately.
• After you have signed on at the web interface, fi rst click the menu item "Setup Wizard (Bridge
Mode)".
To start the confi guration programme, click "Next".
54