Care And Cleaning - Klarstein 10032588 Bedienungsanleitung

Operation and Key Functions
Plug the heater in to a suitable outlet.
1 Power Switch
2 Flame Switch
3 Heat Switch
4 Thermostat

CARE AND CLEANING

• Switch off and unplug from the power supply before cleaning.
• Using a soft, moist cloth, with or without a mild soap solution, carefully clean the
exterior surface of the product.
• Allow the product to completely cool before handling or cleaning it.
• Do not allow water or other liquids to run into the interior of the product, as this
could create a fire and/or electrical hazard.
• We also recommend the periodic cleaning of this appliance by lightly running a
vacuum cleaner nozzle over the guards to remove any dust or dirt that may have
accumulated inside or on the unit.
• Do not use harsh detergents, chemical cleaners or solvents as they may damage the
surface finish of the plastic components.
• Dust can be removed by lightly wiping the glass surface with clean, lint free cloth or
paper towel. To remove fingerprints or other marks, use a damp cloth with a good
quality household glass cleaner. The front glass panel should be completely dried
before reusing the heater.
• The product can be stored in the off-season, we recommend using the original (or
appropriately sized) box. It is important to keep it in a safe, dry location.
Turn on this switch, the fireplace is now ready
for use.
Switches the flame effect on.
Switches the heater on.
Set the room to reach the temperature.
EN
17