Working Advice; Maintenance And Service; Maintenance And Cleaning - Bosch IXO Originalbetriebsanleitung

34 | English
The indicator for left rotation 6 lights up when the On/Off switch 8
is actuated and the motor is running.
Switching On and Off
To start the machine, press the On/Off switch 8 and keep it pressed.
The power light 10 lights up when the On/Off switch 8 is slightly or complete-
ly pressed, and allows the work area to be illuminated when lighting condi-
tions are insufficient.
To switch off the machine, release the On/Off switch 8.
Fully automatic spindle locking (Auto-lock)
The spindle is locked when the On/Off switch 8 is not pressed.
This enables screws to be screwed in, even when the battery is empty and
allows for the machine to be used as a screwdriver.
 When the spindle is locked, do not press the On/Off switch 8 for more
than 15 seconds. Otherwise the power tool can be damaged.

Working Advice

 Apply the power tool to the screw only when it is switched off. Rotat-
ing tool inserts can slip off.
Up to 13 screwdriver bits can be stored on the side of the battery charger 12.
The fixture that holds the screwdriver bits can be removed.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
 For safe and proper working, always keep the machine and ventila-
tion slots clean.
When the battery is no longer operative, please refer to an authorised after-
sales service agent for Bosch power tools.
1 609 92A 0P3 | (6.8.14) Bosch Power Tools