Instructions For Overhaul - Ramsey Winch HD-P 177,9 Bedienungsanleitung

DIS-ASSEMBLY
Drain oil from gear housing cover by removing pipe plug #37 and relief fitting #32. Remove tensioner assembly
1.
Disconnect tube #40 from elbow #43 on valve #41 and fitting #29 on brake #30b. Remove motor #33 and gasket
2.
#30a by removing (2) capscrews #22. Remove valve #41, if needed, from motor by loosening (4) capscrews #16.

INSTRUCTIONS FOR OVERHAUL

16
43
41
22
33
30a
40
5
.
32
37