Ramsey Winch HD-P 177,9 Bedienungsanleitung Seite 11

7. Remove winch tie bars #2 and #3 by removing (8) capscrews #19, (8) lock washers # 24, and (4) shoulder bolts
#25. Pull gear end bearing #7 from drum assembly #1.
3
25
24
19
Pull drum assembly #1 from end bearing #6. Remove quad-rings #34 from grooves in drum bushings. Remove input
8.
shaft #11 from end bearing. Examine splined ends of input shaft for signs of wear, replace if damaged. Examine drum
assembly #1 for signs of wear.
25
24
19
6
4
38
2
8
11
34
8
24
25
25
19
24
7
1
19
34