Expolite TourBeam MC60WB Bedienungsanleitung Seite 33

MENU
PERFORM
UPLOAD: sends fixture settings to all fixtures that are set in SLAVE mode and are connected via
DMX-cable to each other. It is possible to send all fixture settings via submenu LOAD PARA or just
the self created user programs via submenu LOAD EDIT.
Untermenu SETTING:
SETTINGS LOCK: locks the settings menu from unauthorised access. Enter password to unlock.
SERVICE LOCK: locks the service menu from unauthorised access. Enter password to unlock.
RECOVERY: sets all settings to factory default. To execute this function you need to enter a
password.
WDMXHIDE: no function on this device!
WDMX\WDMX RESET: no function on this device!
DEFAULT PASSWORD: UP + DOWN + UP + DOWN + ENTER
DMX ERROR UPLOAD LOAD PARA
LOAD EDIT
SETTING SETTINGS LOCK
SERVICE LOCK
RECOVERY
WDMXHIDE
WDMX WDMX RESET
E-33
DMX ERROR YES
NO
DMX ERROR
YES
DMX ERROR
NO
DMX ERROR
OFF
DMX ERROR
ON
DMX ERROR
OFF
DMX ERROR
DMX ERROR ON
DMX ERROR
*****
DMX ERROR YES
NO
YES
DMX ERROR
NO
DMX ERROR