Storch Krümelmonster Bedienungsanleitung Seite 28

Commissioning
1. Insert the sleeve on the 10 m vacuum hose (4) into the mount on the adapter (2) for the pre-separator (cams must
latch into place)
2. Put the cover on the (3) rubber ring of the adapter (2) (port pointing upward) and close the locks at the sides (fold
up and latch into the groove in the lid).
3. Now connect the angled piece of the connecting hose 1.5 m (5) to the lid (3), and the lower end of the hose with
your vacuum cleaner.
4. Then connecting your sanding device with the vacuum hose 10 m (4)
5. Plug the power plug on your sander into the socket on your vacuum cleaner.
The system is now ready for operation.
Note:
For your own safety, always use appropriate personal protection equipment during sanding and maintenance
work!
Please also observe the operating manual for the vacuum cleaner that you intend to use with the Cookie
Monster unit. This must be suitable for accommodating the intended suction material.
Fig. 2
28