Specifications; Led Indicators; Sd Card Slot - Axis Q8414–LVS Installationsanleitung

Specifications

LED Indicators

Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup > System
Options > Maintenance.
Status LED
Green
Amber
Red
Network LED
Green
Amber
Unlit
Power LED
Green
Amber

SD card slot

NO NO TICE NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when
inserting or removing the SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product
is running. Disconnect power or unmount the SD card from the product's webpage before
removal.
This product supports SD/SDHC/SDXC cards (not included).
AXIS Q8414–LVS Network Camera
Indication
Steady green for normal operation.
Steady during startup. Flashes when restoring settings.
Firmware upgrade failure.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Steady for connection to a 10 Mbit/s network. Flashes for
network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
23
EN