Safescan 2600 series Handbuch Seite 5

ENGLISH | DEUTSCH | ČESKY | MAGYAR | БЪЛГАРСКИ | POLSKI | SLOVENČINA
2.1 Counting modes
Press the [MOD] key to select a counting mode.
MIX
(available for the 2665 & 2685 models)
(Speed-SP2 or lower is recommended).
SORT: Sheet counting with counterfeit detection for sorted notes.
COUNT: Sheet counting (free count) with detection for all available currencies.
For sheet counting without counterfeit detection, choose CUR: ALL.
Note:
In SORT mode; When a banknote of a different denomination/size (2610) is detected this warning message will be
displayed; "Denomination different". The machine will stop counting. The banknote of the different denomination/size
(2610) will be the last counted banknote in the stacker.
2.2 Currency selection
Press [CUR] to choose & select the available currencies within the active counting mode.
[MIX] 2665: EUR, 2685: EUR & GBP
[SORT] EUR, GBP & NOK
[COUNT] EUR, GBP, USD, PLN, SEK, NOK & ALL (without detection)
2.3 Batch mode
Press [0-9] to preset the batch number.
To Switch Off the batch function, repeatedly press the [0] key till the batch number indication switches off.
2.4 Add mode
Press [ADD] to count accumulatively. The screen will display ADD when the function is active. Press [ADD] again to
deactivate the function.
2.5 Speed
Press [SPD] to set counting speed (SP1= Low, SP2=Medium and SP3=High).
• High speed: 1500 notes/minute
• Medium speed: 1200 notes/minute
• Low speed: 800 notes/minute
Note:
During value counting of mixed banknotes the recommended speed is: SP2 (medium).
: Value counting and counterfeit detection for sorted and unsorted notes
(not available for 2610 model)
5