Installing And Connecting The Refrigerator; Changing The Door Hinge - Dometic COOLMATIC HDC275 Montage- Und Bedienungsanleitung

HDC275
7 Installing and connecting the
refrigerator
Please note the following instructions for installation on boats:
D
DANGER!
If the device is powered by the mains, ensure that the power supply has
a residual current circuit breaker.
A
NOTICE!
The device can be tilted sideways up to 30°. When setting up the
refrigerator, note that it must be fastened to take account of this. If you
have any questions regarding installation, consult your specialist dealer.
7.1

Changing the door hinge

You can also change the hinge of the doors, so that the doors open to the left rather
than the right.
➤ Unscrew and remove the top bolts (fig. 2 1, page 3).
➤ Remove the upper door (fig. 2 2page 3).
➤ Remove the spacer (fig. 2 3, page 3).
➤ Remove the middle hinge (fig. 3 1, page 3).
➤ Remove the lower door (fig. 3 2page 3).
➤ Unscrew and remove the bottom bolts (fig. 4 1, page 4).
On the opposite side:
➤ Fasten the bottom bolts.
➤ Attach the lower door.
➤ Fasten the middle hinge firmly.
➤ Fit the spacer.
➤ Attach the upper door.
➤ Fasten the top bolts.
EN

Installing and connecting the refrigerator

17