Starting A Programme - Electrolux GA60PLVC Benutzerinformation

Starting a programme

When you activate the appliance, the
display shows the programme list. The
programme ECO is always the default
programme.
1. Scroll the programme list and select
a programme.
2. Select applicable options if desired.
Once options are set, go back to the
programme list to start the selected
programme.
3. Press OK.
If the programme is applicable to the
option TimeSaver, you have to confirm
Fast or Normal.
4. Close the appliance door to start the
programme
How to delay the start of a
programme
It is not possible to set the delay start
with the MyFavourite programme.
1. Select a programme.
2. Press Option.
The display shows the option list.
3. Select Delay start.
4. Press OK.
5. Select the number of hours desired
for the delay start.
You can delay the start of a programme
from 1 to 24 hours.
6. Press OK to confirm.
7. You can select other applicable
options.
8. Press repeatedly Option until the
display shows the selected
programme.
9. Press OK.
10. Close the appliance door to start the
countdown of the delay start.
When the countdown is completed, the
programme starts automatically.
Opening the door while the
appliance operates
If you open the door while a programme
is running, the appliance stops. It may
affect the energy consumption and the
programme duration. When you close
the door, the appliance continues from
the point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme will end.
This will not happen if the
door is opened by AirDry.
CAUTION!
Do not try to close the
appliance door within 2
minutes after AirDry
automatically opens it, as
this may cause damage to
the appliance. If, afterwards,
the door is closed for
another 3 minutes, the
running programme ends.
Cancelling the delay start while
the countdown operates
When you cancel the delay start the
programme and the options are set to
their default values.
1. Open the appliance door.
2. Press and hold Option for about 3
seconds until the display shows: Stop
washing?.
• Select Resume and press OK to
continue with the countdown.
Close the appliance door.
• Select Stop and press OK to
cancel the delay start.
Cancelling a running
programme
When you cancel the running
programme the options are set to their
default values.
1. Open the appliance door.
2. Press and hold Option for about 3
seconds until the display shows: Stop
washing?.
• Select Resume and press OK to
continue with the running
programme. Close the appliance
door.
• Select Stop and press OK to
cancel the running programme.
ENGLISH 17