Nice TT6 Gebrauchsanleitungen Seite 9

13 Move a little step down
06 Move to partial position 1
07 Move to partial position 2
08 Move to partial position 3
09 Move to partial position 4
10 Move to partial position 5
11 Move to partial position 6
Note – The available commands must also be available for the
motor.
5.5.1 – Move to partial position 1, 2, 3, 4, 5, 6
command
Moves the motor to the set position after the partial position
has been assigned.
Structure
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD IND 04
The data field is empty.
Example
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD 01 04
Command Data CR
[AA]
06 – –
Command Data CR
[AA]
06 – –
Response
Start TT ADR TT ENDPOINT
[XX] [YY]
RISP 01 04
5.5.2 – STOP command
Stops the motor.
Structure
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD IND 04
The data field is empty.
Example
Start TT ADR TT ENDPOINT
[XX] [YY]
CMD 01 04
Response
Start TT ADR TT ENDPOINT
[XX] [YY]
RISP 01 04
Command Data CR
[AA]
06 – –
Command Data CR
[AA]
03 – –
Command Data CR
[AA]
06 – –
Command Data CR
[AA]
06 – –
English - 7