Axis Q8665–LE Installationsanleitung Seite 24

AXIS Q8665–LE PTZ Network Camera
Note
To release the conduit from the conduit cable, insert a screwdriver and turn the conduit
while pulling the conduit.
4. Make sure the seal is in position.
5. Route the power and signal cables through the cable gland shown in the illustration.
6. Attach the fixing nut to the conduit.
7. Route the network cable through the cable gland shown in the illustration.
NO NO TICE NO TICE TICE
To maintain the product's IP rating and reduce cable strain, make sure to tighten the
cable glands.
8. To prevent the cables from slipping out, tighten the cable glands after the cables have
been routed through.
9. Attach a cable tie to secure the cables.
24