Assembly Of Drill Motor; Adjust The Column Tilt - Husqvarna DMS 240 Bedienungsanweisung

Assembly of drill motor

IMPORTANT! Always pull out the plug from the outlet socket
before cleaning, maintenance or assembly.
• Always remove the drill bit before the motor is mounted or
dismounted.
• Lock the feed housing lock.
• Fit the drill motor on the quick mount (A).
• Mount the quick mounting and drilling machine in the track
on the locking clamp.
• Secure with the locking screws (C).
A
B
C

Adjust the column tilt

Loosen the locking screws for column tilt and set the desired
drill angle. Tighten the locking screws. Use the feed handle.
The column can be tilted 0-60°.
The angle indicator can be used for approximate adjustment.
If higher precision is required, alternative measuring methods
should be used.
12 –
English
ASSEMBLY